Bottle Blowing Equipment

KRC2500-I Bottle Blow Molding Machine

Mid-capacity bottle blowing equipment for PET and PP packaging factories that need balanced output and footprint.

At a glance

KRC2500-I buying fit before quotation.

Use this summary for first-pass screening. Engineering still confirms exact output, mold cavity, bottle acceptance and line handoff from your bottle data.

Machine typeAutomatic two-step stretch blow route

Material routePET / PP / PETG

Bottle volumeEngineering confirmation required; signed specification not on file

OutputEngineering confirmation required; signed specification not on file

CavityEngineering confirmation required; signed specification not on file

Best forCosmetic bottles / Medicine bottles

Quote scopeMachine only / machine + mold / complete line

Required RFQ dataBottle drawing or sample photo, Material and volume, Target pcs/hr, Mold cavity expectation

Spec statusUnsigned planning references; engineering confirmation required

Bottle format fit

Where this model fits.

Cosmetic bottles
Medicine bottles
Daily-use bottles
Beverage containers

PETPPPETG

Material options listed3

Spec statusEngineering confirmation required

Application uses4

Machine familyKRC

Engineering review

Engineering notes.

Balanced output equipment
Factory installation support
Bottle mold support
Contact for specification

Buyer decision paths

Use the right comparison before asking for price.

Compare by bottle format, material, mold scope and output risk instead of treating the model name as the full purchasing decision.

pet bottle blowing machine manufacturer

PET Bottle Blowing Machine Manufacturer Evaluation

Manufacturer comparison should show legal company identity, product scope, factory support and a clear RFQ path.

Factory equipment sourcingChina manufacturer comparisonPET bottle line RFQ

water bottle blowing machine

Water Bottle Blowing Machine

Water bottle buyers need preform data, bottle volume, target output and filling-line handoff clarified before quotation.

Mineral water bottlesBeverage bottlesPET bottle line expansion

pet blow molding machine

PET Blow Molding Machine Selection and RFQ Guide

Buyers comparing PET blow molding machines should confirm bottle volume, preform data, output target, mold scope and downstream handoff before comparing price.

PET water bottlesCosmetic bottlesMedicine bottles

Quote-ready details

What engineering needs to validate KRC2500-I.

The fastest quote path is a complete bottle and tooling brief: drawing or sample photo, material, neck finish, target output, mold scope and destination.

01Bottle and application fit

Confirm whether the project is for cosmetic bottles, medicine bottles, daily-use bottles or another bottle format before selecting KRC2500-I.

02Material route

Check material against PET, PP, PETG and confirm whether the bottle needs PET, PP, PETG, Tritan, PPSU or another resin.

03Output and cavity plan

The available public model page does not publish verified hard parameters. Send target output, bottle data and cavity expectations for engineering confirmation.

04Scope and destination

State whether the inquiry needs machine only, mold only, machine plus mold, auxiliary equipment, installation, training or complete line planning.

Sample acceptance

Sample acceptance before tooling release

Use bottle samples, neck finish checks and mold cavity review to confirm the route before tooling and shipment decisions.

Bottle sampleMold routeRFQ approval

Bottle formats

Container formats this route serves.

Formats are shown to help you recognise a match. Final bottle acceptance is confirmed from your drawing or sample.

Reference visualizations of unbranded container formats — not photographs of a delivered project.

Buyer decision paths

Choose the route that matches where you are.

Every path reaches the same engineering team. Starting from the right one avoids being asked for data you do not have yet.

I know my bottle and targets

Send bottle drawing or sample, neck finish, output target and mold scope. Engineering proposes the machine and tooling configuration.

Request engineering quote

I am still comparing options

Share the application, material route and volume you are planning for. Engineering narrows the route before you commit to a specification.

Request a route review

I need a similar solution

Send a reference or competitor model and the bottle it runs. Engineering identifies the closest match and states where it differs.

Request a match review

Sample acceptance

What you can send to start engineering review.

Any one of these is enough to open a review. Physical samples and drawings both work; send whichever you already have.

Reference visualization of material a buyer can send for engineering review. — **Bottle samples** Physical bottles or reference samples

Intake reference visualization — not a verified project photograph or measured result.

Worked examples

Line contexts this route appears in.

Illustrative line visualizations, shown so you can place the route in a production context.

Reference visualization of an unbranded container line for this application category. — Carbonated drink lines

Application reference visualization — not a PetBlowMold facility, customer installation, delivery record or verified production evidence.

Get quote-ready

What you send, and what engineering confirms.

Public values on this page are planning references. Sending the left column lets engineering close the right column in the written quotation.

Request engineering quote

You provide

Bottle drawing or sample photo
Material and volume
Target pcs/hr
Mold cavity expectation

Engineering confirms

Machine type
Material route
Bottle volume
Output
Cavity
Best for

Technical data status

Hard parameters await engineering confirmation.

The available public model page names this model but does not publish verified output, bottle envelope, cavity, pressure, power, footprint or weight values. This page therefore shows confirmation fields only.

Item	Typical value / option	Evidence status
Machine type	Automatic two-step stretch blow route	Engineering confirmation required
Material route	PET / PP / PETG	Engineering confirmation required
Bottle volume	Engineering confirmation required; signed specification not on file	Engineering confirmation required
Output	Engineering confirmation required; signed specification not on file	Engineering confirmation required
Cavity	Engineering confirmation required; signed specification not on file	Engineering confirmation required
Best for	Cosmetic bottles / Medicine bottles	Engineering confirmation required
Quote scope	Machine only / machine + mold / complete line	Engineering confirmation required
Required RFQ data	Bottle drawing or sample photo, Material and volume, Target pcs/hr, Mold cavity expectation	Engineering confirmation required
Spec status	Unsigned planning references; engineering confirmation required	Engineering confirmation required

RFQ confirmation notes

Bottle drawing or sample photo
Material and volume
Target pcs/hr
Mold cavity expectation
Do not infer hard parameters from the model name; require each value in the written quotation.
Request current sample, machine and packing photos when the model is shortlisted.

Confirm final specs with bottle drawing

Model shortlist

Compare KRC900-II, KRC2500-I and KRC5000-I before final selection.

The public model pages name KRC2500-I and KRC5000-I but do not publish verified hard parameters. Use this table only to route an engineering review; the written quotation must confirm every project-specific value.

Model

Output status

Bottle envelope status

Best fit

When to choose

Action

KRC900-II PET

Engineering confirmation required

startup / compact bottle route

Water bottles, cosmetic bottles and compact PET programs.

View details Send RFQ

KRC2500-I

Engineering confirmation required

Confirm from bottle volume, material, preform data, target output and mold fit.

Use only after the written quotation confirms output, cavity plan, utilities and line layout.

View details Send RFQ

KRC5000-I

Engineering confirmation required

Confirm from bottle volume, material, preform data, target output and mold fit.

Use only after the written quotation confirms output, cavity plan, utilities and line layout.

View details Send RFQ

Not sure yet? Send bottle data

Buyer confidenceHard specs await engineering confirmation This page separates public product context from information that must be confirmed by engineering before order.

Quote starts from bottle drawing or sample, not a generic catalog price.

Public specs are shown only where manufacturer materials support them.

Missing parameters are marked for engineering confirmation, not being invented.

One project brief collects material, output, mold scope and destination before quote.

Planning layer

Illustrative worked examples and RFQ tools connected to KRC2500-I.

Use these explicitly illustrative scenarios, comparisons and RFQ tools to organize questions before pricing; they are not delivered-project records.

Water and beverage bottles

PET Water Bottle Startup Route

A PET water bottle startup should validate bottle volume, preform route, target output and filling handoff before comparing machine price.

Open worked example

Edible oil bottles

Edible Oil Handle Bottle Mold Route

Handle oil bottle molds should be reviewed as geometry-risk tooling, not as a simple round bottle mold.

Open worked example

Automatic vs Semi-automatic PET Bottle Blowing MachineChoose the route after bottle data, output target and factory workflow are known.

More worked examples, comparisons and RFQ tools

Large Water Bucket Mold RouteLarge water containers PET Blow Molding RFQ ChecklistHTML + PDF checklist

Bottle samples

Use sample category to confirm mold and machine fit.

Send a bottle sample photo or drawing with this machine model so engineering can check neck finish, volume, material route and mold constraints together.

Daily-use bottle samples sample reference

Daily-use packagingDaily-use bottle samples

Cosmetic bottle shape references sample reference

Cosmetic packagingCosmetic bottle shape references

Bottle mold output samples sample reference

Sample displayBottle mold output samples

Product FAQ

Answer the commercial questions before RFQ handoff.

These questions reduce vague inquiries and keep sales follow-up focused on bottle data, mold route and final shipment requirements.

What buyer data is needed before quoting KRC2500-I?

Send bottle drawing or sample photo, material, volume, neck finish, target output, mold scope and destination so engineering can confirm the KRC2500-I route.

Is KRC2500-I enough for every bottle machine project?

No. KRC2500-I should be checked against bottle geometry, material route, cavity plan, output target and downstream handoff before final purchase.

Can this page provide a final price for KRC2500-I?

No. The page gives public product context and a buying checklist. Final quotation depends on bottle data, mold requirements, line scope, packaging, destination and support needs.

Machine + mold RFQ

Confirm the mold and line route before buying hardware.

For PET and PP bottles, the machine model, mold thickness, cavity plan, preform route and downstream handling should be reviewed together.

Request engineering quote Compare products